Die Suche ergab 501 Treffer
- 03.06.2022, 03:56
- Forum: Spielwiese
- Thema: Weber 32/36
- Antworten: 29
- Zugriffe: 3039
Re: Weber 32/36
No more than 0,2 bar fuel pressure with Weber carbs.
- 08.05.2022, 17:15
- Forum: Schrauben im Normalbereich
- Thema: ET Rekord Felgen
- Antworten: 18
- Zugriffe: 1943
Re: ET Rekord Felgen
Measure the backspace of your original wheels and compare with the backspace of the new ones.
http://www.wheelspecialists.com/wheel-specs
https://tireswheelsdirect.com/wheel-off ... alculator/
http://www.wheelspecialists.com/wheel-specs
https://tireswheelsdirect.com/wheel-off ... alculator/
- 16.02.2022, 21:22
- Forum: Schrauben im Normalbereich
- Thema: 1.9S 3 fach und 4 fach gelagerte Nockenwelle
- Antworten: 6
- Zugriffe: 668
Re: 1.9S 3 fach und 4 fach gelagerte Nockenwelle
Of the standard four bearing Opel cams the D(19SH) and K(20S) are probably best for a 19S.
- 16.02.2022, 19:39
- Forum: Schrauben im Normalbereich
- Thema: 1.9S 3 fach und 4 fach gelagerte Nockenwelle
- Antworten: 6
- Zugriffe: 668
Re: 1.9S 3 fach und 4 fach gelagerte Nockenwelle
You can use a four bearing cam without problems.
- 23.01.2022, 11:38
- Forum: Schrauben im Normalbereich
- Thema: 1.2 OHV in Rekord A ??
- Antworten: 42
- Zugriffe: 4503
Re: 1.2 OHV in Rekord A ??
No, the bellhousing is totally different.
- 22.08.2021, 13:44
- Forum: Schrauben im Normalbereich
- Thema: Hinterachse rubbelt, rattert hoppelt
- Antworten: 56
- Zugriffe: 3798
Re: Hinterachse rubbelt, rattert hoppelt
Try turning the shocks a few clicks stiffer.
- 04.08.2021, 12:47
- Forum: Schrauben im Normalbereich
- Thema: VA Zugstreben
- Antworten: 37
- Zugriffe: 1642
- 02.07.2021, 18:28
- Forum: Schrauben im Normalbereich
- Thema: Ausgleichskorb Hinterachse vom Rekord E?
- Antworten: 1
- Zugriffe: 475
Re: Ausgleichskorb Hinterachse vom Rekord E?
You need to transplant everything inside the 22i axle to your Rekord C axle, except the half shafts. But it must be from a 22i limo, a 22i Caravan has the larger Senator/Monza/Omega type diff. If you are going to use the Getrag 240, you must also shorten your Rekord C drive shaft about 70mm and swap...
- 19.06.2021, 17:29
- Forum: Schrauben im Normalbereich
- Thema: Von Kopf bis…Block
- Antworten: 2
- Zugriffe: 519
Re: Von Kopf bis…Block
An original 19SH head has four cam bearings and a hydraulic cam. I'm not 100% sure, but I think it should say X19 on the pad on the left side of the cam inspection cover.
- 13.06.2021, 19:57
- Forum: Spielwiese
- Thema: Import aus Schweden zulassen
- Antworten: 9
- Zugriffe: 1751
Re: Import aus Schweden zulassen
The plate is of the old type that was in use before -72/-73 and the letter Y says that the car was registered in Västernorrlands Län. https://sv.wikipedia.org/wiki/V%C3%A4sternorrlands_l%C3%A4n#/media/Fil:Västernorrland_County.png You could try asking Transportstyrelsen if it is still in the register.
- 13.06.2021, 18:28
- Forum: Spielwiese
- Thema: Import aus Schweden zulassen
- Antworten: 9
- Zugriffe: 1751
Re: Import aus Schweden zulassen
Maybe this can be of use: http://www.opel66-72.de/viewtopic.php?f=2&t=13243
- 06.06.2021, 15:43
- Forum: Schrauben im Normalbereich
- Thema: Didta US Version
- Antworten: 4
- Zugriffe: 444
Re: Didta US Version
From -71 and up, the engines are of the low compression type due to stricter emission rules. The engines are basicly 19N motors with a two barrel carb instead of a 35PDSI, so a re-jetting of the carb is probably necessary.
- 04.05.2021, 21:14
- Forum: Spielwiese
- Thema: Lieferwagen
- Antworten: 10
- Zugriffe: 1112
Re: Lieferwagen
Not too hard to find here in Finland, they were popular back in the day because deliverys were tax exempt. But you could only drive max 80km/h though.
- 23.04.2021, 19:57
- Forum: Schrauben im Normalbereich
- Thema: Getriebeölwechsel
- Antworten: 28
- Zugriffe: 1987
- 19.04.2021, 21:56
- Forum: Schrauben im Normalbereich
- Thema: Brauche Info zur 17S Nockenwelle
- Antworten: 13
- Zugriffe: 1232
Re: Brauche Info zur 17S Nockenwelle
17S Rekord C with a Solex 35PDSI and 75ps, 17S Rekord D with a Solex 32DIDTA and 83ps. The 17S was available up to about -75 in the Rekord D, from then it was replaced with the 19N.