Die Suche ergab 496 Treffer
- 22.08.2021, 13:44
- Forum: Schrauben im Normalbereich
- Thema: Hinterachse rubbelt, rattert hoppelt
- Antworten: 56
- Zugriffe: 3747
Re: Hinterachse rubbelt, rattert hoppelt
Try turning the shocks a few clicks stiffer.
- 04.08.2021, 12:47
- Forum: Schrauben im Normalbereich
- Thema: VA Zugstreben
- Antworten: 37
- Zugriffe: 1625
- 02.07.2021, 18:28
- Forum: Schrauben im Normalbereich
- Thema: Ausgleichskorb Hinterachse vom Rekord E?
- Antworten: 1
- Zugriffe: 471
Re: Ausgleichskorb Hinterachse vom Rekord E?
You need to transplant everything inside the 22i axle to your Rekord C axle, except the half shafts. But it must be from a 22i limo, a 22i Caravan has the larger Senator/Monza/Omega type diff. If you are going to use the Getrag 240, you must also shorten your Rekord C drive shaft about 70mm and swap...
- 19.06.2021, 17:29
- Forum: Schrauben im Normalbereich
- Thema: Von Kopf bis…Block
- Antworten: 2
- Zugriffe: 467
Re: Von Kopf bis…Block
An original 19SH head has four cam bearings and a hydraulic cam. I'm not 100% sure, but I think it should say X19 on the pad on the left side of the cam inspection cover.
- 13.06.2021, 19:57
- Forum: Spielwiese
- Thema: Import aus Schweden zulassen
- Antworten: 9
- Zugriffe: 1732
Re: Import aus Schweden zulassen
The plate is of the old type that was in use before -72/-73 and the letter Y says that the car was registered in Västernorrlands Län. https://sv.wikipedia.org/wiki/V%C3%A4sternorrlands_l%C3%A4n#/media/Fil:Västernorrland_County.png You could try asking Transportstyrelsen if it is still in the register.
- 13.06.2021, 18:28
- Forum: Spielwiese
- Thema: Import aus Schweden zulassen
- Antworten: 9
- Zugriffe: 1732
Re: Import aus Schweden zulassen
Maybe this can be of use: http://www.opel66-72.de/viewtopic.php?f=2&t=13243
- 06.06.2021, 15:43
- Forum: Schrauben im Normalbereich
- Thema: Didta US Version
- Antworten: 4
- Zugriffe: 444
Re: Didta US Version
From -71 and up, the engines are of the low compression type due to stricter emission rules. The engines are basicly 19N motors with a two barrel carb instead of a 35PDSI, so a re-jetting of the carb is probably necessary.
- 04.05.2021, 21:14
- Forum: Spielwiese
- Thema: Lieferwagen
- Antworten: 10
- Zugriffe: 1108
Re: Lieferwagen
Not too hard to find here in Finland, they were popular back in the day because deliverys were tax exempt. But you could only drive max 80km/h though.
- 23.04.2021, 19:57
- Forum: Schrauben im Normalbereich
- Thema: Getriebeölwechsel
- Antworten: 28
- Zugriffe: 1975
- 19.04.2021, 21:56
- Forum: Schrauben im Normalbereich
- Thema: Brauche Info zur 17S Nockenwelle
- Antworten: 13
- Zugriffe: 1223
Re: Brauche Info zur 17S Nockenwelle
17S Rekord C with a Solex 35PDSI and 75ps, 17S Rekord D with a Solex 32DIDTA and 83ps. The 17S was available up to about -75 in the Rekord D, from then it was replaced with the 19N.
- 18.04.2021, 09:32
- Forum: Schrauben im Normalbereich
- Thema: Konsolen für Recarositze Commodore A Coupe selbstgemacht
- Antworten: 66
- Zugriffe: 12710
Re: Konsolen für Recarositze Commodore A Coupe selbstgemacht
Yes, they are of different length and they are 5mm thick. But I suppose a thickness of 10mm could be even better.
- 17.04.2021, 13:19
- Forum: Schrauben im Normalbereich
- Thema: Konsolen für Recarositze Commodore A Coupe selbstgemacht
- Antworten: 66
- Zugriffe: 12710
- 24.03.2021, 04:13
- Forum: Schrauben im Normalbereich
- Thema: C30NE mit H-Kennzeichen
- Antworten: 26
- Zugriffe: 2973
Re: C30NE mit H-Kennzeichen
Sind beim NE auch die Ein- und Auslaßschächte und Ansaug- und Abgaskrümmer ab Werk größer ? BITTE NUR QUALIFIZIERTE ANGABEN ! Danke und Gruß Andy The 30E has a better flowing intake manifold. Also the exhaust manifold outlet diameter is bigger. The C30NE from an Omega A or Senator B has bigger valv...
- 14.03.2021, 17:44
- Forum: Spielwiese
- Thema: umfrage impfung
- Antworten: 229
- Zugriffe: 17537
Re: umfrage impfung
It's not just about us, it's about all those that have a higher risk getting the serious version of the disease and, in the worst case, dying of it. So I will gladly take the shots if it stops high risk people getting the disease. Just my 2€cent.
- 01.03.2021, 20:50
- Forum: Schrauben im Normalbereich
- Thema: Abgaskrümmer kl. & gr. Flansch identisch?
- Antworten: 90
- Zugriffe: 8780
Re: Abgaskrümmer kl. & gr. Flansch identisch?
Der Weber hat ja nicht die selben Probleme wie der Didta. Garantiert kann der Weber mehr ab. Würde an der Stelle gar nicht so viel machen. Der Weber ist 50 Jahre jünger. Wenn der die gleichen Probleme hat würde ich den Dreck persönlich nach Italien fahren. Der Didta hat zu wenig Deckelschrauben. Al...